Will not start
A weak battery, a starter fault, fuel that is not arriving, or a controller alarm.
Onsite generator repairs, servicing & maintenance across Gauteng
North West
ProService Generator Repairs provides onsite generator repairs, servicing and fault finding when a visit is arranged to a North West address. The work covers residential and commercial standby sets at the premises where they are installed.

A booking starts with the address and what the generator is doing. Technicians come to the set. Homes, businesses and larger standby installations are in scope when the fault or the service can be done on site.
This is the same generator work used elsewhere: no-start diagnosis, diesel servicing, voltage checks and control-panel faults. It is not a separate branch, and it does not replace the Gauteng areas already listed on the site. Hartbeespoort stays with Pretoria.
Towns are not listed here. If you are unsure whether a visit can be arranged, call or send the address with the make, the fuel type and the fault.
Repairs, servicing and fault finding for a visit that has been arranged to the address.
Starting, fuel, electrical and output faults diagnosed at the premises.
Oil, filters, coolant and a starting-system check.
Scheduled servicing so a standby set is checked before it fails.
Fault support when a set has failed. Availability is confirmed on the call.
Fuel, cooling and start faults on diesel sets.
Smaller petrol sets where a property still uses one.
Installation where a new set or changeover is part of the job.
Low or unstable voltage measured once the engine is running.
Alarms, auto-start failure and transfer faults read on the panel.
Filters, contaminated diesel and air in the lines.
Rewinding when tests show the windings, not the AVR.
A controlled load test when a start does not prove the set.
Battery, fuel and shutdown checks before parts are swapped.
An engine that turns and will not fire.
Engine running, with no usable output.
Temperature shutdowns traced through coolant, airflow and load.
The fault is identified on site. These notes are not a home repair procedure.
A weak battery, a starter fault, fuel that is not arriving, or a controller alarm.
Filters, air in the fuel system, or a shutdown while the engine is turning.
AVR, alternator, breaker or wiring when the engine is already running.
Engine speed, the governor and the load.
Coolant, leaks and airflow after the set has been running.
A service visit covers oil, filters, coolant and the charging circuit while the supply is still on. Preventative maintenance is how a standby set is checked before the next outage, rather than only after it has failed.
A click with no crank is the battery path. An engine that turns and will not fire is fuel or a shutdown. A set that never tries on auto is the controller, once the battery is known to be sound. Diagnosis names the cause before parts are recommended.
Diesel work covers filters, contaminated fuel, delivery and cooling. The lift pump and injectors are opened only if the engine still starves after the filters are clear.
No output voltage, low voltage and unstable voltage are measured on site. Low frequency follows engine speed. There is no safe home adjustment for the AVR or the governor.
Alarms, a failed automatic start, and an ATS or AMF that does not transfer are read on the control panel. A set that runs and will not take load is tested there before the engine is condemned.
Share the kVA, the fuel type and the fault when you book. A size limit is not published.
Fuel, starting and cooling faults on diesel sets.
Smaller petrol sets at homes and light sites.
Sets kept for backup and serviced on a schedule.
Auto-start and changeover, checked with the controller.
Home standby sets.
Business standby sets at the premises.
Larger installations where the work can stay on site.
Portable petrol and small diesel frames.
These are brands ProService Generator Repairs already services. A listed brand is not a manufacturer accreditation.
House standby sets, including batteries and planned servicing.
Business sites with fuel, output or controller faults.
Serviced on site when the work can stay there, including a load test when a no-load run is not enough.
The generator is inspected where it is installed.
Electrical and mechanical causes are tested before parts are replaced.
Planned maintenance and breakdown work are both booked.
The address is confirmed, then the findings are explained before work goes ahead.
01
Call, WhatsApp or send a quote request for a visit in North West.
02
Send the suburb, make, model, kVA, fuel type, the fault or alarm, and the controller model if you can see it. Photos of the set and the data plate can go on WhatsApp.
03
A time is agreed from the diary. A same-day slot is offered only when one is open, and it is confirmed on the call.
04
The technician inspects the generator on site and identifies the likely fault or the service that is due.
05
The findings and the proposed repair or service are explained before parts are changed.
06
Repairs or servicing then follow the scope you approve.
Google Review
They handle our cross-border industrial generator maintenance in the North West province flawlessly. They are highly capable technicians for remote, heavy-duty generator repairs.
Google Review
Excellent heavy-duty support in the North West.
This is the local page for North West. A repair is a breakdown. Servicing is one planned visit for oil, filters and inspection. Maintenance is the ongoing schedule that keeps a standby set ready. Book the matching job, then send this suburb.
Yes, when a visit can be arranged to that address. Call with the location, the fuel type and the fault.
Yes. Diesel fuel, filters and routine servicing are done on site.
A no-start can be the battery, fuel, a filter or a controller alarm. The cause is tested before parts are changed.
Yes. Output is measured once the engine is running, then traced through the AVR and alternator.
Yes. Changeover and automatic-start faults are diagnosed with the control panel.
Yes. Oil, filters, coolant and the charger are checked on a scheduled visit.
No. Hartbeespoort remains with the Pretoria visit.
Contact ProService Generator Repairs for onsite generator repairs, servicing, maintenance and fault diagnosis in North West and surrounding suburbs.