Controller and ATS
A start that is never called, or a running set that does not transfer the building.
Onsite generator repairs, servicing & maintenance across Gauteng
Lyttelton
Lyttelton generator visits cover homes and office standby sets. ProService Generator Repairs services them on site and traces controller and ATS faults, output voltage, batteries and overdue maintenance.

Lyttelton sits between Irene, Clubview and the wider Centurion and Pretoria areas. A house set here is often a residential diesel that has to start after weeks of sitting. An office set on the same streets is asked to transfer and then hold voltage once equipment connects.
Those are different faults. A battery that only clicks is not a controller replacement. A controller that never calls for a start is not a new battery. Voltage that sags after a clean start is AVR or load work. Preventative servicing checks oil, filters, coolant and the charger so the next outage is not the first test.
Pretoria has its own coverage when a site sits that way. Clubview and Irene are the closest Centurion neighbours.
Controller faults, output, batteries and planned servicing for homes and offices.
Alarms, auto-start failure and ATS faults that leave a site on a dead supply.
Voltage that will not hold once the office or the house connects.
Oil, filters, coolant and a charge-circuit check.
A repeat schedule for standby sets that must be ready between outages.
Battery and start-signal checks.
Engine running, output missing or unusable.
Fuel and service faults on home and office diesels.
Broader diagnosis across the engine and the electrical side.
Lyttelton splits between office changeover faults and house sets that will not start.
A start that is never called, or a running set that does not transfer the building.
Low or wandering voltage once loads connect, measured before the AVR is condemned.
A house set that only clicks, with the charger tested on the same visit.
Start signal, battery and any latched shutdown before parts are listed.
Fuel and filters once the engine is already turning.
Engine speed, governor and load when the hertz reading falls.
Filters, air and a weak lift pump on diesel sets that die under load.
Oil, coolant and a charger that has been ignored between outages.
An office generator that will not start in Lyttelton is often held off by an alarm or a failed auto-start signal. A house generator is more often a flat battery or fuel that has sat. Wiring and a shutdown sensor are checked when neither of those explains the symptom.
The root cause is identified before a controller and a battery are both replaced.
Low, missing or unstable voltage may involve the AVR, alternator, excitation, a breaker, wiring or the load. Low frequency follows engine speed, the governor and whether the engine can hold that speed once the office connects.
Lyttelton office sets fail at the panel when automatic start never calls, or at the ATS when the engine runs and the floor does not move across. Communication faults on the controller are read before the unit is written off.
Filters, contaminated diesel, air and the lift pump are checked when a set starts and then dies. A planned service covers oil and filters without opening the injectors.
Residential standby sets and office generators.
House standby diesels.
Office and small business sets.
ATS and AMF behaviour.
Fuel, battery and service faults.
Sets kept for backup and serviced on a schedule.
A larger installation where the fault can be done on site.
These are brands ProService Generator Repairs already services on home and office sets.
Homes, including batteries, fuel and planned servicing.
Offices where a controller, transfer or voltage fault stops work.
Scheduled servicing and diagnostics where the work stays on site.
A home standby set and an office generator are both in scope.
A key start is not treated as proof the ATS will transfer.
A flat battery is traced to the charge circuit when that is the cause.
Oil, filters and coolant are checked before the next outage.
01
Call, WhatsApp or send a quote request for a visit in Lyttelton.
02
Send the suburb, make, model, kVA, fuel type, the fault or alarm, and the controller model if you can see it. Photos of the set and the data plate can go on WhatsApp.
03
A time is agreed from the diary. A same-day slot is offered only when one is open, and it is confirmed on the call.
04
The technician inspects the generator on site and identifies the likely fault or the service that is due.
05
The findings and the proposed repair or service are explained before parts are changed.
06
Repairs or servicing then follow the scope you approve.
Google Review
They repaired our clinic's backup generator in Lyttelton with extreme urgency, understanding the critical nature of our power needs perfectly.
Google Review
Dependable mechanics serving the Lyttelton area.
This is the local page for Lyttelton. A repair is a breakdown. Servicing is one planned visit for oil, filters and inspection. Maintenance is the ongoing schedule that keeps a standby set ready. Book the matching job, then send this suburb.
Yes. Onsite repairs and servicing cover homes and offices in Lyttelton.
Yes. Changeover and auto-start faults are diagnosed with the control panel.
A drop under load can be the AVR, the alternator, a breaker or more equipment than the set can hold. Output is measured before parts are recommended.
Yes. A battery that cannot crank is a common house-set no-start. The charger and connections are checked on the same visit.
On a schedule, not only after it fails. The interval depends on the maker’s guidance and how often the set runs.
Low frequency follows engine speed. The governor, controller settings and the load are checked when the reading falls.
Pretoria has its own generator coverage. A Lyttelton booking stays in Lyttelton, and a Pretoria address is arranged on the Pretoria service.
Contact ProService Generator Repairs for onsite generator repairs, servicing, maintenance and fault diagnosis in Lyttelton and surrounding suburbs.